ISO Glass Bonding Sealant 18Ml Silicone Glass Glue No More Nail Sealant

Bonding In Renovations And Assembly Techniques 18Ml Junbond No More Nail Sealant

Junbond^®  JBN1 a general purpose construction adhesive suitable for bonding a wide variety of building materials

Product Features:

1, Super strong initial viscosity, high bonding strength;
2, Wide range of uses, the vast majority of substrates can be bonded, and even wet wood can be bonded;
3, Flexible, weathering, waterproof, non-brittle, will not affect the adhesion of buildings contraction movement;
4, Will not subsidence, can be sealed, dry paint;
5, Does not contain formaldehyde, benzene and other harmful substances;
6, Anti chemical corrosion, anti cold, high temperature.

Application Method:

• Use a caulking gun to extrude the adhesive as bead onto one surface in strips or dabs.
• Make sure to apply the adhesive to the edge of the panels.
• Press the surfaces together immediately and for better adhesion, batter down with a hammer. The pressure applied plays an important role in the final bonding strength.
• For heavy components or for vertical fixing, use a support until the adhesive is completely cured.
• Apply the sealant under usual industrial hygiene standards. Make sure to work in a place that offers good ventilation. If it is not sufficiently ventilated, make use of breathing equipment.
• Supex No Nails adhesive can be used on all surfaces, except PS, PP and PE.
• Before application, it is advised to do a preliminary compatibility test.

General purpose construction:

As a contact adhesive for the installation of wall and floor panels
Metal, timber & other sheets of plan materials to concrete, plaster or other rigid surfaces
Most bonding applications where high strength, gap filling one component adhesive is required
Timber, metal, cementitious and plaster sheets to timber or metal studs
Installation of battens or other fixings to brick, masonry or concrete walls
Industrial bonding of plinths, wall panels, and skirting boards.
Bonding of plasterboards, polystyrene isolation and decoration panels and ceramic tiles.

Precautions:
1, Nail free glue has not yet been solidified, the loose oil can be used to remove dry after the use of scraping or grinding in addition to residual stains exposed. The product can be used with the laying of the floor.
2, High temperature adhesion will be weakened (to avoid long-term bonding in the sunshine of the metal).

Application Areas:

1- Wood to wood assemble application.

2- Metal joints to lumber, lumber and treated lumber.

3- Prefinished panels.

4- Bathroom fixtures.

5- Fiber glass shower enclosures.

Caveat:
1- The product is a dangerous product, should be stored in a cool, dry place. Construction environment must be well ventilated, away from high temperature and fire source;
2- The product should be stored in children can not get to avoid contact with the eyes, not dumped into the sewer. If swallowed, should be immediately sent to hospital for emergency treatment, and produce the product container or label;
3- If the use of the process of dizziness and other adverse conditions, immediately to the outdoor fresh air or immediately seek medical attention.
4- If the product contact with the eye, rinse with water for 15 minutes, then immediately seek medical attention.

Color

* White

Storage:

Storage Instruction: Store cartridge in dry and cool place

Shelf life: 24 months from the date of manufacturing.

Product TDS:

Application:                                                                                                                                                       

Junbom Hui Bei Factory                                                                                                                                

Package & Delivery                                                                                                                                   

Exhibition                                                                                                                                                      

FAQ                                                                                                                                                               

Q1: Are you factory?

A1: Yes, we are factory.

Q2: Can I do an OEM?

A2: Yes,we do the brand, logo as your requirements.

Q3: What other products do you have?

A3: Besides our mainly products silicone sealant, and polyurethane foam, we also have many other products, such as liquid nails,beauty sealant,glass glue,polyurethane foam cleaner ,foam gun and silicon gun etc.

Q4:Why we choose you? What is your strength?

A4:With 30 years experiences in this field, we are a professional supplier of the well-know customers. Our facilities conform to the standard audit requirement and our products meet the certification terms from different countries and areas.

Q5:What is your sample policy?

A5: We can supply 2-3 samples for free, but as this is aerosol products with pressurized gas, it is dangerous goods, we only supply the Cured sample.And the freight cost need to be prepaid by customers.

If you want to know more details information, pls just feel free to contact us! :)